White Poly Aluminium Chloride PAC for Potable Water Treatment

Product details:

It is a new and highly efficient inorganic polymer coagulant.The products use pure raw materials (aluminium hydroxide, hydrochloric acid or high purity hydrochloric acid) with advanced technology and good flocculation effect. Its water purification effect is much better than the traditional aluminium sulfate, iron salts and other common inorganic coagulants and general aluminium chloride hydroxide. The solid product adopts spray drying technology, which is the highest purity among the domestic and international poly aluminium chloride products.

Method of use

1. According to different conditions of raw water, the best dosage can be obtained by taking a small test before use.

Generally, the output is 1-15kg / 1000 tons of water for solid products and 3-40kg / 1000 tons of water for liquid products.The specific amount of investment is determined by the actual experimental amount of the user.

2. The dosage should be added according to the optimal dosage obtained in the small test, and attention should be paid to the observation and adjustment during the operation.If the alum flowers in the sedimentation tank are small and the remaining turbidity is large, the dosage is too small.If alum flowers in the sedimentation tank are large and upturned, and the remaining turbidity is high, the dosage is too large,the dosage should be adjusted appropriately.

Packaging and storage:
1: 25kg/bag in a PP woven bag with PE inside.
2: and store in a cool, dry place, prevent weathered, don't and inflammable and explosive and radioactive substances or chemicals piled up.
3: does not affect the use effect of moisture. But try not to let them damp, damp easily dissolved.